Noise and Vibration Solutions

Sensors

There are several accessories that can work with our analyzers. Some of them are sensors while the others are interfaces. These sensors can be proprietary or they can be purchased off-the-shelf.

Sensors

Some of the supported sensors include:

  • Single Axis Sensor
  • Seat Accelerometer
  • Hand-Arm Vibration Sensor
  • RPM Speed Sensor
  • Temperature Sensor

Interface

The devices can interface with:

  • USB 2.0
  • Camera dock
  • Bar-code Scanner
  • Expandable memory – SD Card
  • Thermal/General Printer
  • Aluminium/Water proof casing
  • 3 Axis MEMS Type Accelerometer(MA301)
  • X, Y, Z 3-Axis Output
  • Offset adjustment
  • Required +5V DC power
  • Output :±4V differential or 0.5V – 4.5V single ended outputs
  • Galvanized isolation
  • Responds to DC & AC Acceleration
  • ±2g, ±5g, ±10g, ±25g, ±50g, ±100g customized model
  • MEMS Type, External Amplifier Needed
  • Sensitivity : 2V/g
  • Dynamic Range : ±2g
  • Frequency Range : 0 – 400Hz (Nominal, 3dB)
  • Low Power Consumption (approx. 50mW)
  • Operating Temperature : -40 – +85℃
  • Power : 8 – 32V DC Power
  • Output : ±4V Differential Output or 0.5 – 4.5V Single
  • Ended Output
  • Low Impedance Output Regardless of Cable Length
  • Max Mechanical Shock : 2000g (0.1ms)
  • Output Noise, Differential (RMS, typical) : 13µg/Hz1/2
  • Rugged Anodized Aluminum Chassis

 

Image description

Tri-Axial Accelerometer for measuring ground vibration.

Image description

 

 

 

 

 

 

 

Amplifier for MEMS Sensor (MSPS)

  • Input Channel : 3-Ch. MEMS Sensor Signal Input(Lemo Conn.)
  • Input Range : ±2g, 2V/g Sensitivity, 0 – 400Hz Range
  • Output : 3 Ch., ±5V (BNC)
  • Differential Amplifier : 1.25 Gain
  • 1g Offset Adjustment Function
  • Power : DC 9 – 12V or 9V Battery
  • Power Switch, Power LED Display(Low Battery Alert)

Image description