Noise and Vibration Solutions

Blast & Environmental vibration| Software

Blast Measurement

Provide the influence evaluation data nearby Structure : 3 axis peak and
PVS(mm/sec) Vibration Measuring Range : 100 mm/sec
Frequency Range : 0.5 ~ 80Hz for 3 channels
Vibration Accuracy : Less than 1%
Vibration Resolution : 0.01 mm/sec
Vibration Measuring Sample Rate : 512 Sa/sec
Storage Sample Rate : 514 samples/sec
Sound Measuring Range : 30 ~ 130 dBA
Frequency Range : 20 Hz ~ 16 KHz
Sound Accuracy : IEC 60651:1979 Type2 (Type1 Option)
Sound Data : Simultaneously Lmax, Lmin, LeqLn, LeqAv
Trigger Level : Set up from 0.1mm/sec with 0.1mm/sec step
Measuring Mode : Selectable Manual, Single, Continuous mode
Selectable Measurement Time : 1sec, 2sec, 3sec, 5sec, 10sec, 1min, 5min,30min, 1hr,
1day, User definable time
Data Storage Capacity : SD Memory Card 4G (Continuously 60 days for the
measurement data including Graph)
Measurement cycle time : no dead time

 

Image description

 

Environmental Measurement 

♦ Measurement Results : Instantaneous Sound Leq, Lmax, Lmin,
Statistic Vibration Level L5, L10, L50, L90, L95
♦ Vibration Frequency Range : 0.5 ~ 80 Hz
♦ Vibration Measuring Range : 35 ~ 120dB
♦ Sound Measuring Range : 30 ~ 130 dBA
♦ Sound Frequency Range : 20 Hz ~ 16 KHz
♦ Dynamic Range : more than 94dB
♦ Selectable Measuring Time :1sec, 2sec, 3sec, 5sec, 10sec, 1min,
5min, 30min, 1hr, 8hr, 1day, User definable set up
♦ Vibration Trigger Level : set up with 1 dB step from 45dB (to measure the
wanted Vib. And Sound Level)
♦ Measuring Mode : Selectable Manual, Single, Continuous mode
♦ Data Storage Capacity : SD Memory Card 4GB (Continuously 60days for the
measurement data including Graph)

Image description

 

Remote Auto Measurement

♦ Communication Type : CDMA Modem or Internet

♦ Remote Data Transmit and Receiving time Control
(To Control interval time with Hour, Min, Sec Unit)
♦ Remote Auto Control up to Max 100 measuring equipments
♦ Remote Control Trigger Level and Measurement time
♦ Possible to measure during receiving the measured data
♦ No need Reset the Equipment by the receiving error
(Simultaneously the Measurement and Communication mode)

Image description

 

Contact Us  for more details